Modine Manufacturing Company

Grenada,  MS 
United States
  • Booth: 2546

Modine CIS, formerly Luvata, manufactures Coiltech products.

Modine CIS manufactures Coiltech Industrial Heat Transfer products.  Coiltech products are used in industries such as renewable energy, power generation, power transmission & many other energy related heat removal/cooling applications. The Coiltech Transformer Oil Cooler, a forced air and oil solution, has been designed for performance and serviceability.


  • Steam Coil
    Coiltech steam coils are specifically designed with condensate management in mind. Tube and connection size are combined to limit condensate retention in the coil, preventing water hammer while delivering even distribution of steam on the entire face....

  • With single-tube coils, the steam supply and condensate return headers and connections are normally at the opposite ends of the coil. Uniform steam distribution to each of the coil core tubes is accomplished through careful header-assembly design. The steam supply connection should be located in the center of the header, with a perforated plate-type baffle located directly behind this connection. Carefully sized orifices are located in each of the core tube entrances into the header.

    Dual-tube coils utilise a smaller inner tube, with precisely spaced, directional, orifice-type perforations. This helps to direct condensate flow to the return header. The steam supply, condensate-return headers, and connections may be fabricated in 'same-end' or 'opposite-end' orientation.

    Steam Coil Application
     • Commercial and industrial heating systems
     • Commercial and industrial drying and processing applications

    Steam Coil Specifications
    Tube material
     • Copper
    Copper nickel
    Carbon steel
    Stainless steel 

    Additional fin material available upon request.

    Standard or steam distributing construction is available for high and low pressure applications. Standard steam type is 5/8" or 1" tube steam coil, known as the single-tube design.

    Any steam coil can freeze when exposed to sub-zero temperatures without the proper drainage of the condensate. Steam-distributing 5/8" and 1" tubes are "freeze resistant", known as the dual-tube design.

  • Transformer Oil Cooler
    Transformer Oil Cooler Specifications...

  •    Coil Features

     High heat exchange efficiency

     Removable headers, manufactured from anticorrosion coated steel

     High resistance to corrosion

     Good resistance against clogging

     Plugged vent and drain connections at each header

      Casing Features

     Coil casing: hot dipped galvanized steel

     Fan deck and fan ring: aluminum

     Externally painted for color matching (on request)

     Fan Motor Features

     Three phase, with squirrel-cage

     Various speeds depending on acoustic requirements

     Axial fan geometry

     Direct drive

     Protection grade: IP 55

     Class of insulation: F

     Impeller dynamically balanced

     Impeller blades in aluminum

     Hub in anti-corrosion coated steel

     Fan Guard Features

     Easily removable

  • Generator Cooler
    One of Coiltech's specialist areas is in producing cleanable coolers for electric motors and generators which are used in sea or river water, or in offshore and nuclear power plants....

  • Our coolers are produced either with single or double tubes. The single tube version is suitable for almost environment, whilst the double tube version has been designed for more critical applications, such as offshore platforms, marine installations or power stations.

    Preventing damage from leakage
    In the double tube version, any leakage form the inner tube enters the outer tube, where a leakage detector sets off an alarm. The outer tube then captures any leaked liquid, and prevents it from causing damage to the rest of the installation.

 Additional Info

Are you a Diverse Supplier (minority-owned, woman-owned, HUBZone, veteran-owned, service disabled veteran-owned business)?

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".