Waterous Company  

SOUTH SAINT PAUL,  MN 
United States
http://www.waterousco.com
  • Booth: 5212


Welcome to FDIC. Be sure to Visit Waterous at Booth #5212.

Waterous has been making quality, American-Made firefighting related products since 1886. THEN - Waterous made complete apparatus including horse-drawn, steam-driven hose carts until 1929 when the focus changed to manufacture fire pumps. NOW - Waterous still builds revolutionary fire suppression systems and holds true to the philosophy “Cast, Machine, Assemble and Test our pumps in America.” ALWAYS - Count on Waterous to provide you with the utmost in quality products and customer service. MOVING FORWARD – 130 Years of history, Waterous remembers our distinguished history but it takes looking to the future to be successful. Moving forward, Waterous promises to be the standard for the industry in generating new ideas, new products and new innovations.

Brands: BRANDS: Aquis Foam Proportioner, Floto-Pump, Endurance Pumps, Pump Modules, Portable Pumps, Industrial Pumps, Single and Two-Stage Pumps


 Videos

Waterous - Value Series Customer Support

 Products

  • CS/CSU Series Pump
    The Best Selling Waterous CS Series Single Stage Pump provides from 750 to 2250 GPM....

  • The Waterous CS/CSU Single Stage Pump is our best-selling pump. There are many reasons why as described below:

    Lower center of gravity provides more room for hose reels, hose beds and other equipment. Two-piece impeller shaft allows true separation of the pump and pump transmission without disassembling either unit, reducing labor time for repair work.

    Industry exclusives / advantages for the CS/CSU Series pumps are as follows:

    • Optional Flame-Plated Impeller(s) on capacities less than 2000 GPM. Standard on capacities over 2000 GPM.
    • Chain-Driven Transmission for superior power transfer and durability.
    • Available in Split-Shaft, PTO-Driven, Rear-Driven or Direct-Driven.
    • Completely Made in the USA.
  • CM/CMU Series Pump
    Waterous CM/CMU Series Pump has been the best selling two-stage fire pump for decades. But we’ve made it even better....

  • Waterous engineers were tasked with updating the pump with features it shares with our best-selling single stage fire pump, the CS/CSU Series.

    Changes to the body castings allowed for better flow and created a machined sealing surface utilizing an oversized O-ring to seal the pump body halves. Old style CM/CMU used a paper gasket and gasket sealer. This new sealing method creates a better bond and will reduce or eliminate any leakage.

    Industry Exclusives:

    • Only pump to pass the New York City Acceptance Test

    • Only Fire Pump used in the Decoking /Descaling Industry

    • Special applications include a High-Rise provision for fighting fires in today’s skyscrapers.


    Features of CM/CMU:

    • Performance:
      • Up to 2250 GPM @ 150 PSI (9000 l/min @ 10 bar)
      • Maximum Pressure: 600 PSI (41.3 bar)

    • Body and internal pump components completely Made in the USA.

    • Flame-plated impellers (Standard on 1500 GPM (5700 L/min or higher

    • Separable impeller shaft for faster service

    • Bronze Ball-type Transfer Valve

    • Available with multiple transmission or PTO options:
      • C20 Chain Drive Transmission
      • PA Chain Drive Transmission
      • K Series Transmission

    • Various Mounting Locations
      • Mid-Ship
      • PTO Mounted
      • Rear Mounted

  • CXSVPA Series Pump
    One of the most versatile pumps Waterous offers is the CX Series. With flows up to 1500 GPM (5500 l/min) the CX can be configured as a split-shaft, PTO-Driven, Direct-Engine Driven or Rear Driven....

  • One of the most versatile pumps Waterous offers is the CX Series. With flows up to 1500 GPM (5500 l/min) the CX can be configured as a split-shaft, PTO-Driven, Direct-Engine Driven or Rear Driven.

    When equipped with a PA Power Take-Off, the CX adds the functionality of pump-and-roll.

    Waterous has added a new S-Intake Fitting reducing the size of the pump envelope to fit in a smaller pump pumphouse.

    Benefits of the CXSPA:

    • Up to 1500 GPM (5500 l/min) off a Power Take-Off
    • Pump-and-Roll capability
    • Fits into a narrow pumphouse, allowing more compartment space
    • Smaller size means pump can be fitted into a shorter wheelbase apparatus
    • PTO-Driven with a variety of gear ratios to keep engine RPM down while pumping at capacity
    • Available in cast iron or bronze
    • 21st Century Manifold allows multiple discharge configurations and capabilities
    • Available Flame-Plated Impellers for longer durability.
  • AQUIS ULTRAFLOW Industrial Foam System
    With the AQUIS™ ULTRAFLOW Industrial Foam System Waterous is on the cutting edge with the best industrial fire suppression technology available to quickly extinguish even the largest fires....

  • Extended throw range with high flow rates is increasingly important to industrial firefighters to maintain a critical application rate of the new aqueous film-forming foams, AFFF. AFFF works by quickly by spreading out over the surface of the fuel, depriving the fire of oxygen, quickly extinguishing petrochemical fires. The new non-fluorinated AFFF firefighting concentrates require much higher application rates than the older fluorinated concentrates that are now being restricted by the EPA due to environment and health concerns. With the AQUIS™ ULTRAFLOW Industrial Foam System Waterous is on the cutting edge with the best industrial fire suppression technology available to quickly extinguish even the largest fires.

    Waterous AQUIS™ ULTRAFLOW Industrial Foam System consists of a Waterous CRUQC-2 pump with 10” suction intakes, flowing over 4000 GPM (15000 l/min) from draft and over 6000 GPM (22,700 l/min) with a pressurized intake, all while simultaneously injecting up to 300 GPM (1135 l/min) of foam concentrate in any of up to 16 discharges under direct operator control via the Waterous AQUIS™ ULTRAFLOW Tellurus touchscreen panel. With a one-hundred foot ladder fully extended, an aerial can throw concentrate/water solution over 400 feet (122 meters) from the apparatus.

  • ECLIPSE GEN 2.0 CAFSystem
    ECLIPSE GEN 2.0 CAFSystem incorporates a powerful integrated midship mounted air compressor system and Waterous Foamulators to produce a bubble stream that keeps the water from separating from the foam practically eliminating slug flow....

  • ECLIPSE GEN 2.0 CAFSystem incorporates a powerful integrated midship mounted air compressor system and Waterous Foamulators to produce a bubble stream that keeps the water from separating from the foam practically eliminating slug flow.

    Each Eclipse Gen 2.0 has pre-set flow and pressure rates for air and water eliminating the need for the operator to perform time consuming adjustments.

    Benefits of the ECLIPSE GEN 2.0:

    • Available with Waterous CS, CSU, CMU, CX and HL Pumps
    • 150 sCFM (4.25 m3/min) Air Compressor
    • Three 2” Foamulators mix turbulent air into the foam solution.
    • AQUIS™ 3.0 Foam Proportioner
    • Tellurus Touch Screen Control
  • Waterous University
    Waterous University is your one-stop shop to learn more about Waterous. Grow your Waterous knowledge with our FREE interactive downloads, posters, videos apps and other applications....

  • Visit Waterous University to grow your Waterous knowledge for free.

    Click Here to visit Waterous University


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.