ANSUL  

Marinette,  WI 
United States
http://www.ansul.com
  • Booth: 2241

ANSUL® special hazard fire protection products include:

-  Hand portable/wheeled fire extinguishers
-  Large self-contained handline units
-  Dry chemical, foam, and gaseous clean agents
-  Hazardous chemical spill control & vapor-mitigating agents

Brands: ANSUL


 Products

  • SILV-EX PLUS Class A Foam Concentrate
    SILV-EX PLUS is a low, medium, and high expansion, Class A foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, corrosion inhibitors and solvents. This formulation provides superior cold weather performance....
     

  • SILV-EX PLUS Class A foam concentrate is designed to combat fires involving ordinary combustible materials, like wood, paper, coal, rubber, and plastic by making water more effective.  The concentrate reduces the surface tension of water providing superior wetting and penetrating characteristics.  This allows the solution to penetrate deep into the char of deep seated fires, promoting cooling and making the Class A fuel less combustible.  The expanded foam solution also creates a dense foam blanket that provides an insulating barrier between the fuel and the air.

    The extended drain time of SILV-EX PLUS foam concentrate provides longer surface wetting and cooling of the fuel and reduces the risk of ignition or reignition.  In addition, foams make water five times more effective on Class A fires and cling to vertical surfaces, providing structure protection.

    SILV-EX PLUS Class A foam concentrate is available in pails, drums, totes, or bulk shipment. 

  • ANSULITE® 3% AFFF Foam Concentrate, MIL-SPEC
    ANSULITE AFC-3MS 3% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro- and hydrocarbon-surfactant technologies to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires....
     

  • ANSULITE AFC-3MS 3% AFFF foam concentrate combines fluoro- and hydrocarbon-surfactant technologies to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for firefighting applications at 3% solution in fresh, salt, or hard water. ANSULITE AFC-3MS foam solution utilizes three suppression mechanisms for rapid fire knockdown and superior burnback resistance:

    ·         The foam blanket blocks oxygen supply to the fuel.

    ·         Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface.

    ·         The water content of the foam solution produces a cooling effect for additional fire suppression

    ANSULITE AFC-3MS 3% AFFF Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards:

    ·         US Department of Defense Military Specification

            MIL-F-24385F: Fire Extinguishing Agent, Aqueous FilmForming Foam (AFFF) Liquid Concentrate, for Fresh and Sea Water

    ·         Underwriters Laboratories Inc.

            UL Standard 162, Foam Liquid Concentrates

            Fresh and Sea Water

    ·         National Fire Protection Association (NFPA)

            NFPA 403, Standard for Aircraft Rescue and Fire-Fighting Services at Airports

            NFPA 409, Standard on Aircraft Hangars

            NFPA 412, Standard for Evaluating Aircraft Rescue and FireFighting Foam Fire Equipment

            NFPA 414, Standard for Aircraft Rescue and Fire-Fighting Vehicles

            NFPA 418, Standard for Heliports

    ANSULITE AFC-3MS 3% AFFF Concentrate is available in pails, drums, totes, or bulk shipment.

  • ANSUL® Foam Mobilcart
    The ANSUL® Foam Mobilcart is designed to provide mobile firefighting foam capability for various hazardous areas where flammable liquids are present. The Mobilcart is a highly maneuverable wheeled unit....
     

  • The ANSUL® Foam Mobilcart is designed to provide mobile firefighting foam capability for various hazardous areas where flammable liquids are present.  The Mobilcart is a highly maneuverable wheeled unit consisting of a 36 gal (136 L) polyethylene tank with two built-in hose storage locations, and educator with metering valve, and two lengths of fire hose with a choice of foam nozzles.

    Common applications include tank farms and refineries, loading areas, chemical processing plants, diked areas, warehouse facilities, paint storage areas, and other manufacturing areas where flammable liquids are a hazard.

    For Class A fire hazards with wood, paper, coal and rubber, SILV-EX PLUS concentrate is recommended.  A broad range of foam concentrates can be used for Class B applications including ANSULITE® AFFF and AR-AFFF, and JET-X high-expansion foam concentrate.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support.