Our Stretcher Safety Arm system is designed for fast access to the unit, with little effort in times of emergency uses. The features of this support are the very small size (weight) and the method of locking it. The new mount for cot system Safety Arm is engineered to be installed on a stretcher (Stryker or Ferno).
This brand-new system is designed to get the use of the medical equipment easier during a patient evacuation. Our support system integrates itself systematically with the frame of the stretcher to secure the equipment and meet the safety regulations and manufacturer recommendations. The armwith dual locking system can be set in two positions to properly evacuate the patient. The pole can be manipulated if needed to get free access to the stretcher both sides, simply by pull down the arm. The rotation of the medical device when locked with a Bracket Pro is still active with the arm. The entire system has been tested to meet the manufacturer requirements and provide with all the safety and security in patient transportation. The installation of the productis very simple and takes only just a few minutes.
The arm pole can be install and remove very quickly in case of emergency; or stays locked at the upper position. The mountsystems offer different mounts configurations for most external defibrillators on the marketto be installed on the cot system. They have many characteristics, more specifically to rotate up to 360 degrees with a locking system. The deployment of the unit is almost instantaniously and the system locked the unit after use and resist to an impact of many times the «G» Force. Installation or uninstallation can be done with less than 5 minutes, in case maintenance or changing, no special tool or complex process.