Digital Illumination Interface Alliance

  • Booth: N35

DiiA is the global industry alliance for DALI lighting control. We are an open organization with more than 160 members. Our DALI-2 certification program builds further confidence in multi-vendor interoperability of DALI products. Also, DALI-2 now extends to all devices in a lighting-control system, including input devices such as sensors, as well as application controllers and bus power supplies. New specifications from DiiA are extending DALI-2 to enable intelligent DALI-2 drivers that can report data in a standardized format. The specifications also simplify the addition of sensors and communication nodes to LED luminaires via an intra-luminaire DALI bus. DALI-2 is the standard for smart lighting control in the IoT era.

Brands: DALI, DALI-2, DiiA


 Press Releases

  • New specifications from DiiA enable smart DALI drivers that can report data, supporting DALI in the IoT era, and can also simplify the addition of sensors and communication nodes to luminaires via an intra-luminaire DALI bus. 

    PISCATAWAY, NJ, USA – September 25, 2018 –

    Addressing the market need for intelligent lighting fixtures with sensing and communication capabilities and IoT connectivity, the Digital Illumination Interface Alliance (DiiA) has finalized a set of new specifications based on the DALI lighting-control protocol. 
    The specifications enable smart LED drivers and luminaires that can report operational, diagnostic and inventory data. Also, the specifications simplify the addition of sensors and wirelesscommunication nodes (also known as network lighting controllers) to luminaires by taking care of power-supply requirements. In turn, this makes it more straightforward for luminaires to participate in the IoT.
    DiiA is the global industry alliance for DALI lighting control, and the five new DiiA specifications build on DALI-2, with its strong focus on multi-vendor interoperability. DiiA has worked with other organizations, notably the American National Standards Institute (ANSI), to ensure global alignment of the specifications (see below). 

    Specification details
    One of the new DiiA specifications (known as Part 251) focuses on luminaire-specific data for asset management and other purposes. This would allow a manufacturer to encode data about the luminaire – such as part number, or nominal light output – in the factory. When the luminaire is installed, the data is readily available to the lighting-control network. A utility company or lightinginstallation owner could use this capability to monitor and manage their lighting assets accurately and efficiently. 
    Two specifications (Parts 252 and 253) enable smart DALI-2 drivers that can store and report operational and diagnostic data in a standardized format. For example, the driver could monitor and report its energy usage, total operating time, and incidences of thermal shutdown, as well as many other parameters. 
    Two further specifications (Part 250 and AUX) focus on power-supply requirements for DALI devices in luminaires. Devices such as sensors or wireless-communication modules are powered by the DALI driver via an intra-luminaire DALI bus. Where necessary, an auxiliary power supply is also specified. As well as simplifying the addition of such DALI devices to luminaries, this opens the possibility for the luminaire to participate in the IoT and to communicate and exchange data with a remote network infrastructure. 
    More details about DiiA’s new specifications are available on the DiiA website: www.digitalilluminationinterface.org/specifications.   
    Harmonization
    One impetus for DiiA’s work was harmonization of different approaches, creating an open market to enable choice for OEMs. A variety of solutions have already been implemented by different suppliers, including drivers that simplify the connection of sensors to luminaires. 
    In developing the specifications, DiiA worked with the ANSI Accredited Standards Committee (ASC) C137 on Lighting Systems. The ANSI committee provided feedback on the draft DiiA specifications, and forthcoming ANSI standards in this area will be aligned with the DiiA specifications, including the proposed ANSI standard C137.4, entitled “Digital Interface with Auxiliary Power”.
    “The close cooperation between ANSI ASC C137 and DiiA is enabling development of specifications that will address stakeholder needs and have global relevancy by aligning with the DiiA specifications,” said Mike O’Boyle, Technical Coordinator of the proposed ANSI C137.4 Working Group.
    In due course, DiiA will provide the new specifications to IEC for incorporation into IEC 62386, the international DALI standard. Also, DiiA will create test sequences for the new specifications, enabling their incorporation into the DALI-2 certification program.
For Technical Support with this webpage, please contact support.