SILICON CARBIDE PRODUCTS INC

HORSEHEADS,  NY 
United States
http://www.scprobond.com
  • Booth: 5848


SCP provides wear resistant ceramics for industrial use.

Since 1994, Silicon Carbide Products, Inc. (SCP) has provided industrial customers with high quality, high performance ceramic components for use in coal-fired power plants, molten non-ferrous metals, mining, petroleum, and large component applications. We are known for quality, reliability, and service. 

Brands: Silicon Carbide Products SCProbond wear and corrosion resistant ceramic and epoxy materials


 Products

  • SCProbond N and TN
    Nitride bonded silicon carbide (NBSiC or NBSC) exhibiting excellent wear resistance in severe environments. Resistant to thermal shock and more impact resistant than other SiC grades....

  • SCProbondTM N is characterized by excellent wear properties in severe industrial environments. It exhibits good resistance to high temperatures even in demanding abrasive applications and has better impact resistance than most silicon carbide grades. Due to its unique properties and ability to be cast into final shape, this cost-effective grade is widely used as a workhorse in coal-fired power plants and in mining for bulk material handling and protective linings, as well as for non-ferrous molten metal contact.

    Typical Applications

    Ash handling sweeps                                            Centrifuge components

    Chutes                                                                   Coal handling components

    Coal preparation applications                               Cyclones

    Frac sand sweeps, elbows, valve body liners       Impellers

    Liners                                                                    Molten metal pump protective sleeves

    Pump components                                                Reactor liners

    Spray nozzles                                                       Transitions

    Wear blocks                                                          Large monolithic shapes

  • SCProbond A/CRC
    Trowel on Abrasion and corrosion resistant compound in a 2 Part epoxy.
    Chemical Resistance: Sodium Hydroxide, Sulfuric Acid< 70%, Ammonium Hydroxide, Nitric Acid< 10%...

  • SCProbond™ A/CRC is a trowelable, silicon carbide filled, abrasion and corrosion resistant wear compound designed for thick application on badly worn areas or known severe wear locations. The unique formula of A/CRC forms a tough high performance barrier that resists sliding abrasion and chemical attack. A/CRC adheres easily to most metals and cast silicon carbide substrates found in harsh processing environments

    A more generic abrasion resistant compound is available as well.

    Product Advantages:


    Smooth non-sag consistency     
    Spreads easily, filling holes, gouges and worn areas in one application
    Can be applied vertically and overhead at 1/2” with no sag
    Excellent corrosion resistance to a wide range of chemicals
    Excellent sliding abrasion wear protection


    Application Guidelines:
    Maximum Service Temp 200ºF
    Working Time 15 minutes
    Functional Cure 7 Hours @ 72ºF-77ºF
    Mix Ratio 2/1 By Volume

  • SCProbond LV-1 and HV-1 Adhesive
    SCProbond™ HV-1 High Viscosity Epoxy Adhesive and LV-1 Low Viscosity Epoxy Adhesive is a high-strength trowelable ceramic adhesive compound....

  • SCProbond™ HV-1 High Viscosity Epoxy Adhesive is a high-strength trowelable adhesive compound designed for installing SCProbond material handling components. This two-part toughened material is suitable for horizontal, vertical, and overhead applications.

    Ordering Information:


    Kit Size: 22LB Kits (2– 1 Gallon Pails)
    Bulk Kit (2– 55 Gallon Drums)


    Product Advantages:


    Easy to mix
    Excellent non-sagging adhesive
    Color: Off White Paste
    Excellent adhesion to metal, ceramic and concrete
    Easy to use 1:1 Formula
    100% solids, VOC/BGE/Solvent Free


    Application Guidelines:


    Maximum Service Temp 200ºF
    Working Time 40-50 Minutes
    Functional Cure 8 Hours @70ºF
    Mix Ratio 1:1 parts by volume (PBV)

    Physical Properties:

    Tensile Shear Strength                           2,250 psi                        ASTM D 1002
    Flexural Strength                                   9,400 psi                        ASTM D 790
    Compressive Strength                           9,800 psi                        ASTM D 695
    Hardness, Shore D                                85                                   ASTM D 2240

    SCProbond™ Low Viscosity Epoxy Adhesive LV-1 is a non-corrosive epoxy system specially formulat-ed to install SCProbond material handling components. This toughened two-part material is suitable for horizontal applications.

    Ordering Information:


    Part Number: SCProbond™ LV-1
    22LB Kits (2—1 Gallon Pails)
    Bulk Kit (2—55 Gallon Drums)

    Product Advantages:


    Easy to mix
    Color: Off White Paste
    Easy to use 1:1 formula
    Excellent adhesion to metal, ceramic and concrete.
    VOC, BGE, and Solvent Free


    Application Guidelines:


    Maximum Service Temp 200ºF
    Working Time 4 Hours
    Functional Cure 8 Hours @ 70ºF
    Mix Ratio 1:1 parts by volume (PBV)

    Physical Properties:

    Tensile Shear Strength                 2,130 psi                 ASTM D 1002
    Compressive Strength                 11,500 psi                ASTM D 790
    Flexural Strength                         8,770 psi                 ASTM D 695
    Hardness Shore D                        82                           ASTM D 2240


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".